Whether gearing up for extended overlanding adventures or increasing your preparedness level, cargo capacity is always top of mind. Add style, lighting, mounting points and cargo capacity with The Hardtop Granite Series Rack Systems by Bestop. Go further for longer with the Hardtop Rack Systems by Bestop for your Gladiator or 2/4 door JL Wrangler.
Works seamlessly with Sunrider for Hardtop by Bestop
All Aluminum construction for reduced weight
E-coat and Powder Coat Finish
Stainless Steel Fasteners for peace of mind
4 Tie Down Anchors on 4147001 (2 Door)
8 Tie Down Anchors on 4147101 (4 Door)
Forward Light Bar Brackets included
Recommended Capacity 135 lbs.
The Sunrider for Hardtop gives you open-air freedom on demand. The Hothead headliner for Jeep Wrangler makes sure that freedom is comfortable in every season. Designed as the dedicated Jeep headliner for the Bestop Sunrider system, this three-layer panel reduces heat transfer in summer, improves insulation in winter, and cuts road noise year-round. It is the most useful hardtop headliner upgrade available for Sunrider-equipped Jeeps. Marine-grade fabric on one side, non-tear radiant barrier foil in the middle, soft insulated headliner on the other. Reversible for summer and winter use. Installs in under 5 minutes. Made in the USA. 100% satisfaction guarantee.
Key Features
- Three-Layer Construction – Marine-grade fabric / non-tear radiant barrier foil / soft insulated headliner fabric. Each layer engineered for a specific job.
- Reversible for Summer and Winter – Summer: marine-grade side out to resist sun damage. Winter: headliner fabric exposed for improved insulation and interior finish.
- Installs in Under 5 Minutes – No tools, no modifications. Designed specifically for the Bestop Sunrider for Hardtop.
- Reduces Heat, Cold, and Road Noise – Year-round comfort improvement for Sunrider-equipped Jeeps in all driving conditions.
- Made in the USA – Built to Bestop’s quality standards with a 100% satisfaction guarantee.
- Sunrider-Specific Fit – Engineered exclusively for the Bestop Sunrider for Hardtop. Not a universal fit.
The Sunrider for Hardtop gives you open-air freedom on demand. The Hothead headliner for Jeep Wrangler makes sure that freedom is comfortable in every season. Designed as the dedicated Jeep headliner for the Bestop Sunrider system, this three-layer panel reduces heat transfer in summer, improves insulation in winter, and cuts road noise year-round. It is the most useful hardtop headliner upgrade available for Sunrider-equipped Jeeps. Marine-grade fabric on one side, non-tear radiant barrier foil in the middle, soft insulated headliner on the other. Reversible for summer and winter use. Installs in under 5 minutes. Made in the USA. 100% satisfaction guarantee.
Key Features
- Three-Layer Construction – Marine-grade fabric / non-tear radiant barrier foil / soft insulated headliner fabric. Each layer engineered for a specific job.
- Reversible for Summer and Winter – Summer: marine-grade side out to resist sun damage. Winter: headliner fabric exposed for improved insulation and interior finish.
- Installs in Under 5 Minutes – No tools, no modifications. Designed specifically for the Bestop Sunrider for Hardtop.
- Reduces Heat, Cold, and Road Noise – Year-round comfort improvement for Sunrider-equipped Jeeps in all driving conditions.
- Made in the USA – Built to Bestop’s quality standards with a 100% satisfaction guarantee.
- Sunrider-Specific Fit – Engineered exclusively for the Bestop Sunrider for Hardtop. Not a universal fit.
Every pickup truck bed deserves a cover. Bestop designed the EZRoll Soft Tonneau Cover to do that job in every climate or weather condition while showing off its sleek low-profile look. EZRoll Soft Tonneau puts ease of installation and use first using our no-drill, bolt-on clamp system and bed rails. We use 3M-brand self-adhesive strips for maximum grip and durability so you know the cover is secure and tight. Dual pull tabs at either rear corner make roll-up super easy 100% access to the bed.
Tough, premium grade leather-grain vinyl-coated polyester withstands any climate or weather
Treated for excellent mildew and UV resistance
Bows are integrated into the fabric for quick roll up
Tonneau sits on top of bed and secures to rail with hook and loop fastener
Features black finish aluminum rails for that OEM look
Bed Clamps allow easy installation directly to bed with no drilling
Rolls conveniently to the back of the truck bed in half a minute
Allows tailgate access without removing cover
Restraint straps secure rolled Tonneau behind cab
Hook and loop system makes the EZ Roll easy to use, even in extreme cold
Every pickup truck bed deserves a cover. Bestop designed the EZRoll Soft Tonneau Cover to do that job in every climate or weather condition while showing off its sleek low-profile look. EZRoll Soft Tonneau puts ease of installation and use first using our no-drill, bolt-on clamp system and bed rails. We use 3M-brand self-adhesive strips for maximum grip and durability so you know the cover is secure and tight. Dual pull tabs at either rear corner make roll-up super easy 100% access to the bed.
Tough, premium grade leather-grain vinyl-coated polyester withstands any climate or weather
Treated for excellent mildew and UV resistance
Bows are integrated into the fabric for quick roll up
Tonneau sits on top of bed and secures to rail with hook and loop fastener
Features black finish aluminum rails for that OEM look
Bed Clamps allow easy installation directly to bed with no drilling
Rolls conveniently to the back of the truck bed in half a minute
Allows tailgate access without removing cover
Restraint straps secure rolled Tonneau behind cab
Hook and loop system makes the EZ Roll easy to use, even in extreme cold
Every pickup truck bed deserves a cover. Bestop designed the EZRoll Soft Tonneau Cover to do that job in every climate or weather condition while showing off its sleek low-profile look. EZRoll Soft Tonneau puts ease of installation and use first using our no-drill, bolt-on clamp system and bed rails. We use 3M-brand self-adhesive strips for maximum grip and durability so you know the cover is secure and tight. Dual pull tabs at either rear corner make roll-up super easy 100% access to the bed.
Tough, premium grade leather-grain vinyl-coated polyester withstands any climate or weather
Treated for excellent mildew and UV resistance
Bows are integrated into the fabric for quick roll up
Tonneau sits on top of bed and secures to rail with hook and loop fastener
Features black finish aluminum rails for that OEM look
Bed Clamps allow easy installation directly to bed with no drilling
Rolls conveniently to the back of the truck bed in half a minute
Allows tailgate access without removing cover
Restraint straps secure rolled Tonneau behind cab
Hook and loop system makes the EZ Roll easy to use, even in extreme cold
When fast, and we mean fast installation or removal is important, nothing beats this tri-fold tonneau cover. Three-panel folding action makes for easy access, and if removed you have a totally open bed to accept larger cargo. EZFold Soft Tonneau Covers give your bed protection from the elements and prying eyes, and feature a low profile appearance that always looks great.
Built-in boxed aluminum frame provides superior strength, quick folding and does not require any rail installation
OEM quality, heavy duty adjustable clamps secure or release with one-hand operation
Durable leather-grain textured vinyl is stretch and shrink resistant, withstands all climates, mildew and UV resistant
Reinforced corner construction for additional strength and stability
Integrated buckle straps secure folded tonneau to truck bed
Easy to install and remove, even in extreme weather
When fast, and we mean fast installation or removal is important, nothing beats this tri-fold tonneau cover. Three-panel folding action makes for easy access, and if removed you have a totally open bed to accept larger cargo. EZFold Soft Tonneau Covers give your bed protection from the elements and prying eyes, and feature a low profile appearance that always looks great.
Built-in boxed aluminum frame provides superior strength, quick folding and does not require any rail installation
OEM quality, heavy duty adjustable clamps secure or release with one-hand operation
Durable leather-grain textured vinyl is stretch and shrink resistant, withstands all climates, mildew and UV resistant
Reinforced corner construction for additional strength and stability
Integrated buckle straps secure folded tonneau to truck bed
Easy to install and remove, even in extreme weather
When fast, and we mean fast installation or removal is important, nothing beats this tri-fold tonneau cover. Three-panel folding action makes for easy access, and if removed you have a totally open bed to accept larger cargo. EZFold Soft Tonneau Covers give your bed protection from the elements and prying eyes, and feature a low profile appearance that always looks great.
Built-in boxed aluminum frame provides superior strength, quick folding and does not require any rail installation
OEM quality, heavy duty adjustable clamps secure or release with one-hand operation
Durable leather-grain textured vinyl is stretch and shrink resistant, withstands all climates, mildew and UV resistant
Reinforced corner construction for additional strength and stability
Integrated buckle straps secure folded tonneau to truck bed
Easy to install and remove, even in extreme weather
Seventy years of Bestop soft top engineering, applied to the truck bed. The Supertop for Truck 2 is the improved truck topper built on consumer feedback – one-person operation from the side of the truck and removable fabric side panels that give you the flexibility fiberglass can’t. Attaches with four clamps, no drilling required, front bulkhead bar and tailgate bar included for a secure fit over any bed liner. Heavy-duty Black Diamond fabric – laminated PVC-coated sailcloth that resists mildew and UV fading. Removable and replaceable DOT-approved tinted rear window panel. Removable side window panels. The soft topper for truck owners who want standing-height cargo coverage that folds back completely when you need the bed open. Note: Third brake light is not included – order part #576.71P separately if needed.
Key Features
- One-Person Operation – Open and close from the side of the truck. No second set of hands needed.
- No-Drill Installation – Four clamps included. Front bulkhead bar and tailgate bar for secure fit over any bed liner.
- Removable Side Panels – Fabric side panels remove completely for open-air truck bed access.
- Heavy-Duty Black Diamond Fabric – Laminated PVC-coated sailcloth. Mildew-resistant and UV-protected for long-term durability.
- Removable DOT-Approved Tinted Rear Window – Replaceable rear window panel keeps the system serviceable long-term.
- Third Brake Light Not Included – Order part #576.71P separately if your application requires it.
